The Effect of process Parameters on Mechanical and Wear Properties of Aluminium Fired Clay Composites.
No Thumbnail Available
Date
2017-08
Authors
Agbeleye, A
Hassan, S.
Esezobor, D
Balogun, S.
Agunsoye, J.
Journal Title
Journal ISSN
Volume Title
Publisher
Unilag Journal of Medicine, Science and Technology (UJMST)
Abstract
In this paper, the mechanical and tribological behaviours of as cast and rolled samples of Aluminium AA1070/fired clay (Al-Clay) composites were studied. The composites were developed through stir casting route with 0-20 wt.% clay particles of grain sizes 250, 177 and 150 µm. The samples were cold rolled to final reduction of 20 and 35%.Hardness,
tensile, impact and wear tests were performed on the developed composite samples and their microstructure were examined to determine the phases present in the composite. The results showed improvement in the mechanical and wear properties of Al-Clay composites with increase in wt.% clay addition. Increase in percent reduction also
showed a reasonable increase in the mechanical and wear properties of the rolled samples. The results obtained clearly shows that Al-clay composite can be produced by stir casting and possess superior properties to the Aluminium AA1070 in terms of wear properties, impact energy, tensile strength as well as hardness.
Description
Staff publications
Keywords
Sliding wear , Surface analysis , Sliding friction , Three-body abrasion , Research Subject Categories::TECHNOLOGY::Engineering mechanics
Citation
Agbeleye A.A., [Et...al] (2017). The effect of process parameters on mechanical and wear properties of aluminium fired clay composites, Unilag Journal of Medicine, Science and Technology, 5(2), 37-46pp.