EFFECTS OF ZnO AND GRAPHITE PARTICULATES ON MECHANICAL AND WEAR CHARACTERISTICS OF Al-Si ALLOY HYBRID COMPOSITES
No Thumbnail Available
Date
2018
Authors
Durowaye, Stephen
Sekunowo, Olatunde
Lawal, Ganiyu
Orji, James
Journal Title
Journal ISSN
Volume Title
Publisher
Usak University Journal of Engineering Sciences
Abstract
Aluminium alloys exhibit some outstanding properties which make them to be widely used in many
applications. This study examined the effect of particles of ZnO and graphite on mechanical and wear
characteristics of Al-Si alloy hybrid composites developed by stir casting method for automotive
application. Zinc oxide and graphite particles were thoroughly mixed in varied weight fractions (11, 14, and
17 wt. %) with Al-Si alloy. The hybrid composite exhibited the highest hardness and tensile strength values
of 113.67 VHN and 163.67 MPa respectively at 14 wt. % particles addition. The volume loss during wear
increased with speed and load but was marginal in the reinforced samples. The microstructure showed
good dispersion of particles of ZnO and graphite in the Al-Si alloy. The mechanical and wear characteristics
of the composites were enhanced by the uniform distribution of the ZnO and graphite particles in the Al-Si
alloy matrix and the strong adhesion of alloy-particles phases.
Description
Keywords
Al-Si alloy; hybrid composites; mechanical characteristics; wear characteristics.
Citation
Durowaye, S , Sekunowo, O , Lawal, G , Orji, J . (2018). EFFECTS OF ZnO AND GRAPHITE PARTICULATES ON MECHANICAL AND WEAR CHARACTERISTICS OF Al-Si ALLOY HYBRID COMPOSITES. Usak University Journal of Engineering Sciences , 1 (1) , 19-27