Browsing Faculty of Engineering by Title

Now showing items 200-219 of 370

  • Land cover mapping using Sentinel-1 SAR and Landsat 8 imageries of Lagos State for 2017 

    Makinde, E. O.; Oyelade, E. O. (Springer Environmental Science and Pollution Research, 2019)
    For several years, Landsat imageries have been used for land cover mapping analysis. However, cloud cover constitutes a major obstacle to land cover classification in coastal tropical regions including Lagos State. In this ...
  • Land Surface Temperature Mapping using Geoinformation Techniques 

    Agbor, C. F.; Makinde, E. O. (Geoinformatics FCE CTU, 2018)
    General environmental management, which involves monitoring and modeling, requires the information of the Land surface temperature (LST) status of area concerned. Land surface temperature has gained relevance recognition ...
  • Land Use Change Analyses in Lagos State From 1984 to 2005 

    Abiodun, O. E.; Olaleye, J. B.; Dokai, A. N.; Odunaiya, A. K. (Proceedings FIG Working Week, 2011)
    The physical development in an urban community and the need to control such development for economic, socio-political and environmental reasons have necessitated the requirement for geographical and statistical information ...
  • Land use change detection and analysis using remotely sensed data in Lekki Peninsula area of Lagos, Nigeria. 

    Olaleye, J. B.; Abiodun, O. E.; Igbokwe, Q. (Proceedings FIG Working Week, 2009)
    Land use is generating worldwide interest as changes in land use are at a rapid rate and it is estimated by the United Nation's Population Fund (1999) that by the year 2025, 80% of the world's population will live in cities. ...
  • Liquid Metallurgy Synthesis and Thermo–electrical Characterization of Copper–aluminum Metal Matrix Composite 

    Osoba, L.O.; Afolabi, A.S.; Emmanuel, V.; Fasuba, O.A. (Advanced Materials Research, 2013)
    Samples of copper-aluminum reinforced metal matrix composite (MMC) were prepared by liquid metallurgy method using micron–sized silicon carbide (SiC) particulate. The resultant MMC samples were characterized to determine ...
  • Low-Cost Construction Through The Use Of Pulverized Bone Foamed Aerated Concrete (PB-FAC). 

    Falade, F.; Ikponmwosa, E.; Fapohunda, C. (2010)
    Provision of affordable housing especially, for low-income earners, which forms the majority or the population. continues to be elusive in the nations of world. The major reason given for this is the high cost of building ...
  • Mechanical and microstructural characteristics of rice husk reinforced polylactide nano composite 

    Adeosun, S.O.; Aworinde, A.K.; Diwe, I.V.; Olaleye, S.A. (The West Indian Journal of Engineering, 2016)
    The application of polylactides in tissue engineering is attracting significant interest. Using renewable; low cost; health and environmental friendly agro waste as reinforcement in electrospun polylactide nano composite ...
  • The mechanical and physical characteristics of steel dust bricks 

    Adeosun, S.O.; Sekunowo, O.I.; Gbenebor, O.P.; Orowho, F. (British Journal of Applied Science & Technology, 2014)
    This work investigates thermal and mechanical properties of bricks produced from particles of electric arc furnace (EAF) hazardous fumes with a view to enhancing safe disposal and reduce the current prohibitive cost of ...
  • MECHANICAL AND WEAR CHARACTERISATION OF QUARRY TAILINGS REINFORCED A6063 METAL MATRIX COMPOSITES 

    Duroway, S.; Sekunowo, O.; Bolasodun, B.; Oduaran, I.; Lawal, G. (Turkish Journal of Engineering (TUJE), 2019)
    The viability of utilizing cheaply sourced quarry tailings (QTs) particles as reinforcing materials for the development of low cost high performance aluminium matrix composites for structural and industrial applications ...
  • Mechanical behavior of electrospun palmfruit bunch reinforced polylactide composite fibers 

    Adeosun, S.O.; Akpan, E.I.; Gbenebor, O.P.; Peter, A.A.; Olaleye, S.A. (The Journal of The Minerals, Metals & Materials Society (TMS), 2015)
    In this study, the mechanical characteristics of electrospun palm fruit bunch reinforced poly lactic acid (PLA) nanofiber composites using treated and untreated filler was examined. Poly lactic acid–palm fruit bunch– ...
  • Mechanical Characterisation of Carbon-Silica Reinforced Composites for Turbine Application 

    Sekunowo, O.; Durowaye, S.; Ogunsina, O. (Journal of the Institute of Engineering., 2019)
    Materials selection and development for application in advanced systems is becoming highly complex involving the need for lower cost alternatives without compromising service performance. This paper investigated ...
  • Mechanical Characterisation of Cast Sn-xFeo-0.2Cu Solder Alloy 

    Sekunowo, O.I.; Durowaye, S.I.; Runsewe, A.M. (Journal of Engineering Research., 2017)
    The act of soldering that is devoid of any debilitating health hazards is a global concern necessitating the development of varied lead-free solders exhibiting desirable solderability. In this study, a lead-free ...
  • Mechanical Characteristics of 6063 Aluminum-Steel Dust Composite 

    Adeosun, S.O.; Akpan, E.I.; Sekunowo, O.I.; Ayoola, W.A.; Balogun, S.A. (International Scholarly Research Network ISRN Mechanical Engineering, 2012)
    Studies on the effect of steel dust (EAF dust) addition on the mechanical properties of 6063 Aluminium alloy have been carried out. The cast composite samples contain steel dust from 2–20 wt% produced in sand mould. These ...
  • Mechanical characteristics of Al‐CaCO3/Zn composites 

    Akpan, E.I.; Abhuliem, I. U.; Adeosun, S.O.; Gbenebor, O.P. (Annals of Faculty Engineering Hunedoara – International Journal of Engineering, 2014)
    Effect of CaCO3 particle (100μm) addition on the mechanical properties of aluminium‐0.5% Si alloy has been investigated. Samples are produced using conventional stir casting method and homogenized at 5500C for four hours. ...
  • Mechanical Characteristics of an Extension Clamp Fabricated from Used Aluminum Beverage Cans 

    Sekunowo, O.I.; Lawal, G.I.; Durowaye, S.I.; Raheem, I.A. (JOM The Journal of The Minerals, Metals & Materials Society (TMS), 2015)
    This article investigates the mechanical properties of a laboratory-sized clamp fabricated from used aluminum beverage cans as part of effort to achieve a cleaner environment and add value. Used aluminum beverage cans, ...
  • Mechanical characteristics of groundnut shell particle reinforced polylactide nano fibre 

    Adeosun, S.O.; Taiwo, O.; Akpan, E.I.; Gbenebor, O.P.; Gbagba, S.; Olaleye, S. (Revista Materia, 2016)
    The PLA-groundnut shell solution is electrospun to produce nanocomposite fibre. The spinneret containing the composite solution was placed 24.7 cm away from the aluminium collector, tilted at an angle of 30 °, and the ...
  • Mechanical properties enhancement of 66/34Mg-alloy for medical application 

    Adeosun, S.O.; Sekunowo, O.I.; Gbenebor, O.P.; Ayoola, W.A.; Odunade, T.A. (International Journal of Medical, Pharmaceutical Science and Engineering, 2014)
    Sand cast samples of the as-received 66/34Mg-Al alloy were first homogenized at 4900C and then divided into three groups on which annealing, normalising and artificial ageing were respectively carried out. Thermal ageing ...
  • Mechanical properties enhancement of conventional mild steel for fastener application 

    Sekunowo, O.I.; Adeosun, S.O.; Ojo, O.E. (Centre of professional research publication- International Journal of Engineering and Technology, 2014)
    Due to the rampant brittle fracture of most mild steel fasteners, an innovative hardening process of microstructure modificaton is employed on conventional mild steel to enhance its mechanical properties. The steel specimens ...
  • Mechanical Properties of Bitumen Quenched Dual Phase Steel 

    Amuda, M.O.H.; Olaniyan, T.A.; Osoba, L.O.; Akinlabi, E.T. (Sains Malaysiana, 2017)
    The mechanical properties of Dual Phase Steel (DPS)-duplex structure-produced by quenching in pre-heated bitumen have been investigated. Medium carbon steels intercritically heated at different temperatures and holding ...
  • Mechanical Properties of Poly (L-Lactide)-Based Composites for Hard Tissue Repairs 

    Aworinde, A.K.; Adeosun, S.O.; Oyawale, F.A. (International Journal of Innovative Technology and Exploring Engineering (IJITEE), 2020)
    The struggle in osteosynthesis continues with the search for more biocompatible materials to replace metallic scaffolds. Poly(L-lactic) acid (PLLA), a biopolymer, was processed via melt-blending technique by blending ...