Investigation into the effects of solid lubricant on the surface characteristics of some metals during orthogonal machining
| dc.contributor.author | Ojolo, S.J. | |
| dc.contributor.author | Damisa, O. | |
| dc.contributor.author | Iyekolo, O. | |
| dc.date.accessioned | 2020-11-17T12:25:23Z | |
| dc.date.available | 2020-11-17T12:25:23Z | |
| dc.date.issued | 2011-12-31 | |
| dc.description | Staff Publications | en_US |
| dc.description.abstract | The main purpose of this paper is to explore the use of solid lubricant during orthogonal machining of carbon steels. This is a pioneer work in Nigeria. Most works have been on oblique cutting using conventional oil as lubricants. Different steels (low, medium and high carbon) were machined at different cutting conditions and tool geometries to determine the effects on surface characteristics while applying solid lubricant. The results showed considerable improvement in the surface finish with the use of solid lubricant. There was also a decrease in surface roughness values as compared to wet machining. Further works on solid lubricant’s effects on cutting force and residual stress could be done. From the findings of this work, solid lubricant use can be advocated as a better alternative to conventional cutting fluid. It is easily recoverable from the chips after machining. So far, in Nigeria, solid lubricant has not been exploited as coolant during machining. This paper will be a platform for other researches on solid lubricants as coolant during cutting/machining in Nigeria. | en_US |
| dc.description.sponsorship | None | en_US |
| dc.identifier.citation | Ojolo, S.J., Damisa, O., Iyekolo, O. (2009). Investigation into the effects of solid lubricant on the surface characteristics of some metals during orthogonal machining. Journal of Engineering Design and Technology, vol. 9(2), pp 130-142. | en_US |
| dc.identifier.issn | 1726-0531 | |
| dc.identifier.uri | https://ir.unilag.edu.ng/handle/123456789/8945 | |
| dc.language.iso | en | en_US |
| dc.publisher | Emerald Group Publishing Limited | en_US |
| dc.relation.ispartofseries | Journal of Engineering Design and Technology;Vol.9(2) | |
| dc.subject | Graphite | en_US |
| dc.subject | Surface roughness | en_US |
| dc.subject | Surface properties of materials | en_US |
| dc.subject | Nigeria | en_US |
| dc.subject | Research Subject Categories::TECHNOLOGY::Engineering mechanics | en_US |
| dc.title | Investigation into the effects of solid lubricant on the surface characteristics of some metals during orthogonal machining | en_US |
| dc.type | Article | en_US |