The Effect of process Parameters on Mechanical and Wear Properties of Aluminium Fired Clay Composites.

Simple item page
dc.contributor.authorAgbeleye, A
dc.contributor.authorHassan, S.
dc.contributor.authorEsezobor, D
dc.contributor.authorBalogun, S.
dc.contributor.authorAgunsoye, J.
dc.date.accessioned2019-09-11T09:55:15Z
dc.date.available2019-09-11T09:55:15Z
dc.date.issued2017-08
dc.descriptionStaff publicationsen_US
dc.description.abstractIn this paper, the mechanical and tribological behaviours of as cast and rolled samples of Aluminium AA1070/fired clay (Al-Clay) composites were studied. The composites were developed through stir casting route with 0-20 wt.% clay particles of grain sizes 250, 177 and 150 µm. The samples were cold rolled to final reduction of 20 and 35%.Hardness, tensile, impact and wear tests were performed on the developed composite samples and their microstructure were examined to determine the phases present in the composite. The results showed improvement in the mechanical and wear properties of Al-Clay composites with increase in wt.% clay addition. Increase in percent reduction also showed a reasonable increase in the mechanical and wear properties of the rolled samples. The results obtained clearly shows that Al-clay composite can be produced by stir casting and possess superior properties to the Aluminium AA1070 in terms of wear properties, impact energy, tensile strength as well as hardness.en_US
dc.identifier.citationAgbeleye A.A., [Et...al] (2017). The effect of process parameters on mechanical and wear properties of aluminium fired clay composites, Unilag Journal of Medicine, Science and Technology, 5(2), 37-46pp.en_US
dc.identifier.issn2408-5059
dc.identifier.urihttps://ir.unilag.edu.ng/handle/123456789/5483
dc.language.isoenen_US
dc.publisherUnilag Journal of Medicine, Science and Technology (UJMST)en_US
dc.relation.ispartofseriesUnilag Journal of Medicine, Science and Technology;Vol.5(2)
dc.subjectSliding wearen_US
dc.subjectSurface analysisen_US
dc.subjectSliding frictionen_US
dc.subjectThree-body abrasionen_US
dc.subjectResearch Subject Categories::TECHNOLOGY::Engineering mechanicsen_US
dc.titleThe Effect of process Parameters on Mechanical and Wear Properties of Aluminium Fired Clay Composites.en_US
dc.typeArticleen_US
Files
Original bundle
Now showing 1 - 1 of 1
Thumbnail Image
Name:
Unilag paper 2.pdf
Size:
374.72 KB
Format:
Adobe Portable Document Format
Description:
The effect of process parameters on mechanical and wear properties of aluminium fired clay composites
Download
License bundle
Now showing 1 - 1 of 1
Thumbnail Image
Name:
license.txt
Size:
1.71 KB
Format:
Item-specific license agreed upon to submission
Description:
Download
Collections
Metallurgical and Materials Engineering- Scholarly Publications