Experimental prediction and optimization of material removal rate during hard turning of austenitic 304L stanless steel

Simple item page
dc.contributor.authorOjolo, S.J.
dc.contributor.authorAdjattor, A.A.
dc.contributor.authorOlatunji, R.S.
dc.date.accessioned2020-12-16T12:07:36Z
dc.date.available2020-12-16T12:07:36Z
dc.date.issued2016-08
dc.descriptionScholarly articlesen_US
dc.description.abstractThis work involves a predictive model for material removal rate (MRR). It investigates the influence of machining process parameters such as cutting speed, feed rate and depth of cut on the material removal rate (output parameter) during hard turning of AISI 304L austenitic stainless steel (0.03 wt. % C (max)). A total of 27 experiments were conducted using a MORI SEIKI SL-253B CNC machine with cemented carbide cutting tool under three different spindle speeds (1000, 1200, 1400rev/min), feed rates (0.05, 0.10, 0.15mm/rev) and depths of cut (0.4, 0.8, 1.2mm). The machining parameter settings were determined using the Taguchi experimental design method. The Taguchi method and relationship between MRR and input parameters were arrived at through MINITAB16 software package. The optimum machining parameters combination was obtained by using larger-the-better analysis of signal-to-noise (S/N) ratio. The optimal cutting condition is at spindle speed level 2 (1200 rpm); feed rate at level 3 (0.15mm/rev) and Depth of cut at level 3 (1.2 mm) which gave an optimum MRR of 77.80243mm3/min. The S/ N ratio response table, main effect plots and the relationship between cutting parameters and the MRR was obtained. A mathematical model was developed using multiple regression analysis to predict MRR during hard turning of AISI 304L austenitic stainless steel. The level of importance and performance characteristics of the machining parameters on MRR was determined by using analysis of variance (ANOVA). From the results, the feed rate had the most significant effects on the MRR followed by depth of cut.The spindle speed has the least effect on MRR. It was also revealed that the predicted results found a good correlation with the experimental results as the regression line fits well for both results data at 95% confidence interval.en_US
dc.identifier.citationOjolo, S.J., Adjattor, A.A., Olatunji, R.S. (2006). Experimental prediction and optimization of material removal rate during hard turning of austenitic 304L stanless steel. Journal of Science and Technology, 36(2),(2016), pp 34-49en_US
dc.identifier.otherhttp://dx.doi.org/10.4314/just.v36i2.4
dc.identifier.urihttps://ir.unilag.edu.ng/handle/123456789/9064
dc.language.isoenen_US
dc.publisherKwame Nkrumah University of Science and Technologyen_US
dc.relation.ispartofseriesJournal of Science and Technology;36
dc.subjectOptimizationen_US
dc.subjectMaterial removalen_US
dc.subjectMachiningen_US
dc.subjectOutput Parameteren_US
dc.subjectResearch Subject Categories::TECHNOLOGYen_US
dc.titleExperimental prediction and optimization of material removal rate during hard turning of austenitic 304L stanless steelen_US
dc.typeArticleen_US
Files
Original bundle
Now showing 1 - 1 of 1
Thumbnail Image
Name:
Paper 13 JUST Mat Removal 2016.pdf
Size:
998.75 KB
Format:
Adobe Portable Document Format
Description:
Main Article
Download
License bundle
Now showing 1 - 1 of 1
Thumbnail Image
Name:
license.txt
Size:
1.71 KB
Format:
Item-specific license agreed upon to submission
Description:
Download
Collections
Mechanical Engineering-Scholarly Publications