Microstructural evolution of chloride- cleaned silicon carbide aluminum composites

No Thumbnail Available
Date
2015
Authors
Adeosun, S.O.
Akpan, E.I.
Gbenebor, O.P.
Balogun, S.A.
Journal Title
Journal ISSN
Volume Title
Publisher
The Journal of The Minerals, Metals & Materials Society (TMS)
Abstract
This study examines the synergy between reinforcement surface modifications on the evolution of microstructures of AA6011-silicon carbide particle (SiCp) composites in multidirectional solidification. Silicon carbide particles (SiCp) were cleaned with ammonium chloride, tin(II) chloride, sodium chloride, and palladium(II) chloride and used as reinforcement to cast AA6011-SiCp composites by applying the stir casting method. A scanning electron microscope and x-ray diffractometer were used to investigate the morphology and phases present, respectively, in the composite material. Results show that wetting agents were effective as they inhibited the formation of Al4C3 in all modified composites. The modified SiCp was found to have varying effects on the morphology, dendrite arm size and direction, size and configuration of AlFeSi, and the amount of eutectic silicon depending on the concentration of the reagent and cleaning time. The highest effect was shown by the use of 40 g/L of tin(II) chloride. The composites had short dendritic arms, good interfacial interaction, and only a few crystals of AlFeSi.
Description
Staff publications
Keywords
Silicon Carbide , Tin (11) chloride , Eutectic silicon , Research Subject Categories::TECHNOLOGY
Citation
Adeosun, S.O., Akpan, E.I., Gbenebor, O.P., Balogun, S. A. (2015). Microstructural evolution of chloride- cleaned silicon carbide aluminum composites The Journal of The Minerals, Metals & Materials Society (TMS), 15 :1717-9